Wire Nail Machine Machine

Operating mechanisms are to longer mounted on one common shaft but on two auziliary shafts thus eliminating long cutter leaver. The cutter slides move in substantial guides and driven directly by cranks acentric. This avoids all determental impacts of the cutter of the against each other consequently reduces cutter wear. The Crank Shaft is carried in four Bearins. The smooth ruining of the nail machine is thus ensured.

Specifications

Model	Capacity of nail	Wire Guage	Production per minute pieces	H.P. x Reqd.
EMT -1	12 to 38mm ½" to 1.5"	18 to 14 SWG 1.2 to 2mm	400 to 450	1.5 x 1440
EMT -2	12 to 50mm ½" to 2"	16 to 12 SWG 1.6 to 2mm	350 to 400	2 x 1440
EMT -3	20 to 80mm ¾" to 3"	14 to 9 SWG 2 to 3.7mm	300 to 350	3 x 1440
EMT -4	25 to 100mm 1" to 4"	12 to 8 SWG 2.6 to 4mm	200 to 250	5 x 1440
EMT -5	35 to 125mm 1.5" to 5"	8 to 6 SWG 4 to 4.9mm	150 to 200	7. 5 x 960
EMT -6	50 to 150mm 2" to 6"	8 to 4 SWG 4 to 6mm	100 to 150	7. 5 x 960
EMT -8	75 to 200mm 3" to 8"	8 to 4 SWG 4 to 6mm	100 to 120	10 x 960